24x25X10 Metal Utility Building

Rating:

Multiple Financing Options

Locations We Serve

Colors Options

24'x25'x10' vertical roof utility building
24 feet wide
25 feet long
10 feet tall leg height
Approx. 13 feet peak height based on standard roof pitch
Typical 3/12 roof pitch on A-frame design
Galvanized steel frame with 14-gauge (2½") tubing
A-frame structure with vertical roof panels
All legs and bows spaced 5' on center
29-gauge roofing and siding panels
Fully enclosed main storage section
Side storage area with partition wall set at 16 feet
Interior partition wall does not extend to full roof height
Outside wall fully enclosed with framed openings and Dutch cuts
Barn red roof panels
Mocha tan wall panels
Barn red trim and corner accents
(2) 10x10 roll-up garage doors for primary vehicle access
(2) 8x8 roll-up garage doors with Dutch-cut frame-outs
(2) 36x80 walk-in doors for daily entry
(2) 30x36 windows for natural light and ventilation
Side storage layout provides covered utility space alongside enclosed area
Common West Coast–style utility layout with open clearance under roof line
Some East Coast customers prefer a garage plus lean-to instead of this design
Recommended alternative: full garage with attached lean-to for enclosed clearance
Typically installed on a concrete slab for best stability
Can be anchored to gravel where local code allows
Most county require a permit for enclosed metal buildings
Best suited for light equipment, utility storage, or seasonal vehicle use